How to Fix a Squeaky Door in 10 Minutes
A squeaky door is one of the most annoying small problems in a home — and one of the easiest to fix. In most cases, you need only a few basic tools and about ten minutes. Here is how to find the cause and silence the squeak for good.

What you will need
- A screwdriver
- Penetrating oil or a silicone-based lubricant
- A hammer and a nail
- A clean cloth
Step 1: Tighten the hinge screws
Open the door and check each hinge. Screws often work loose over time, which lets the door sag and rub. Tighten every screw, but do not over-tighten them — you can strip the wood. If a screw spins without gripping, remove it, push a wooden matchstick or a small piece of dowel into the hole with a little wood glue, let it dry, and then drive the screw back in.
Step 2: Lubricate the hinge pins
If the screws are tight, the squeak is probably coming from a dry hinge pin. Close the door, tap the pin upward out of the hinge with a hammer and nail, and wipe it clean. Rub a thin coat of lubricant over the pin, slide it back in, and open and close the door a few times to work the oil in. Repeat on any other noisy hinges.
Step 3: Check the door and frame
If the door still squeaks, look for a spot where it rubs against the frame. You will often see a shiny or worn patch on the paint. A small amount of lubricant on the rubbing point can help, and in damp weather a door may swell slightly and then settle again as it dries out. If the door is badly warped or the frame is out of square, it may be time to ask a professional for help.
Keeping doors quiet
A quick spray of lubricant on the hinges once a year will keep most doors quiet. While you are at it, check the other doors in your home — fixing a small squeak now is much easier than dealing with a sticking door later.
